Board logo

flasher/hazzard relay noise
saigonij - 22/7/07 at 05:46 PM

for the sva, should the indicators have a clicking sound when flashing? i have an electronic one and its silent....


blakep82 - 22/7/07 at 05:49 PM

they have to make a noise... i guess you could fit a buzzer to the indicator light on the dash


saigonij - 22/7/07 at 05:55 PM

what can i do to add a noise? a buzzer? can you buy "clickers" ?


nitram38 - 22/7/07 at 06:02 PM

Just rechecked the sva manual: either an audible or visual tell tale is required.
If visual, should be within the view of the driver

[Edited on 22/7/2007 by nitram38]


saigonij - 22/7/07 at 06:09 PM

ok, so as long as i have dash board lights then thats ok?

does anyone know where i can get a clicker component from just in case?


Hellfire - 22/7/07 at 06:18 PM

Just get a small buzzer; couple fo quid tops; from Maplins or similar. Mounted in series as it's easy not to see the warning lights and adding a little noise is a helper.

Steve


nitram38 - 22/7/07 at 06:33 PM

If you have a visual tell tale then an auldable one not required.

Do yourself a favour and download a copy of the sva manual.
It took me all of 30 seconds to find the answer......something you could have done and probably quicker than getting the wrong answer from other people who are just guessing!


saigonij - 22/7/07 at 06:47 PM

where did you down load a copy from?


nitram38 - 22/7/07 at 06:54 PM

I can't remember where I got mine as I did a search on google about 18 months ago and I found it quite quickly.
I am sure if you put a post asking for the same, then someone else might have the actual link.


nib1980 - 22/7/07 at 06:55 PM

quote:
Originally posted by saigonij
where did you down load a copy from?


try here


http://www.rootpeg.net/SVAMarch2004.pdf


nitram38 - 22/7/07 at 06:57 PM

quote:
Originally posted by nib1980
quote:
Originally posted by saigonij
where did you down load a copy from?


try here


http://www.rootpeg.net/SVAMarch2004.pdf


That's a good'en !


DIY Si - 22/7/07 at 07:20 PM

Is that the latest version, as applies to us/kit builders? I know they have regular updates, but haven't heard about anything special.


nitram38 - 22/7/07 at 08:03 PM

quote:
Originally posted by DIY Si
Is that the latest version, as applies to us/kit builders? I know they have regular updates, but haven't heard about anything special.


It has not changed much. Go to the vosa website for a few minor updates.


RazMan - 22/7/07 at 10:00 PM

Ref indicator warnings - you do not need an audible warning of any kind, just a flashing light.


nitram38 - 22/7/07 at 11:04 PM

quote:
Originally posted by RazMan
Ref indicator warnings - you do not need an audible warning of any kind, just a flashing light.


It is either one:

Description
Description



[Edited on 22/7/2007 by nitram38]


RazMan - 23/7/07 at 04:55 PM

I stand corrected - just the hazards that need a light then

[Edited on 23-7-07 by RazMan]