Am I right in thinking that there are no issues with the type and shape of the dials if they are within the specified area around the steering wheel....

Specifically, I wanted to use something like a dash 2, but having offered up the tub of my J15 build, I realise there is next to no room for such a dash.......the only one I can find that will fit is this Koso unit:

Click

Can anyone confirm that these ok for IVA?.

Thanks.

Behind the wheel they just need to be blunted.

Outside the 'excluded area' it needs to be 2.5mm rad on anything that projects more than 5mm.

If your talking about the etb digidash 2, then I beleive that will comply where ever it is located as it has a 2.5mm radius on the frame.

Don't exclude the idea of recessing it into the dash, making it flush. It's just a question of making some bracketry, and gluing or rivetting this on to the dash itself.

quote:

---

Originally posted by RK
Don't exclude the idea of recessing it into the dash, making it flush. It's just a question of making some bracketry, and gluing or rivetting this on to the dash itself.

---

Description

Hi
We used the Koso RX1 as it is behind steering wheel
Passed IVA no problems. and without a windsceen, dec19 2011
Good luck
René


Interior trim

[Edited on 25/1/13 by renetom]