[img]
IVA ok mirrors [/img]
I should point out the picture is taken of the mirrors as they come out of the box, the mirror head should be rotated 180 degrees to the head for the correct orientation, they'd look a bit strange when fitted otherwise!
Can anyone reccomend me any wing mirrors that would be suitable for IVA ?
I've seen these
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?
ViewItem&item=300571100196&ssPageName=ADME:B:WNAFP:GB:1123 on ebay - has anyone used them succesfully?
Cheers
Dave
Clearly states they are IVA ok, so whats the query?
I was wondering if anyone had used them and how they had found and also if there were any better reccomendations out there. Although the advert says IVA approved you wouldn't have any comeback if they didn't pass - I've had parts from some of the 'big' parts supplier sold as IVA ok and on checking them I have found that they are not - once bitten twice shy!
I understand you may be talking about the glass size, however at 6"x4" it's bound to be ok, but I thought I'd mention again for
all those reading that exterior mirrors are exempt from the exterior projections test at IVA.
Section 16: Exterior Projections, Page 120/282 "The assessment will not apply to exterior mirrors"
Plenty of examiners pick people up on this but it's another case where they should read the book thoroughly first.
ATB
Stott
Hi
They look almost identical to the ones I use on the Furore F1 for IVA, have successfully passed twice recently with these, they may not be identical
as my mirror heads measure more like 3 .25 x 5", but the tester raves about them, & believe me the Furore does not lend itself well to the
rear view test, effectively being single seater positioning.
I can do a set to a fellow locoster for £13.95 + £3.95 P & P if that helps. I have them from stock.
Rgds Russ
quote:
Originally posted by Stott
I understand you may be talking about the glass size, however at 6"x4" it's bound to be ok, but I thought I'd mention again for all those reading that exterior mirrors are exempt from the exterior projections test at IVA.
Section 16: Exterior Projections, Page 120/282 "The assessment will not apply to exterior mirrors"
Plenty of examiners pick people up on this but it's another case where they should read the book thoroughly first.
ATB
Stott
quote:
Originally posted by 40inches
Can you be more specific on the exact location in Section 16?
I have IVA version:6.01 09/05/2011 running from pages 131 to141 and can't find the "The assessment will not apply to exterior mirrors" part.
quote:
Originally posted by deezee
quote:
Originally posted by 40inches
Can you be more specific on the exact location in Section 16?
I have IVA version:6.01 09/05/2011 running from pages 131 to141 and can't find the "The assessment will not apply to exterior mirrors" part.
Its Section 16, Exterior Projections, on the 2nd page, under method of inspection. Top of that page.
Russ
Do you have any pics of the mirrors you could post? I can't seem to find them on your webshop and your ebay link doesn't seem to work.
Cheers
Dave
quote:
Originally posted by Stott
I understand you may be talking about the glass size, however at 6"x4" it's bound to be ok, but I thought I'd mention again for all those reading that exterior mirrors are exempt from the exterior projections test at IVA.
Section 16: Exterior Projections, Page 120/282 "The assessment will not apply to exterior mirrors"
Plenty of examiners pick people up on this but it's another case where they should read the book thoroughly first.
ATB
Stott
Image attached, sorry haven't had a chance to get them on the website or ebay as yet & thanks for pointing out that the ebay link is way out
of date! I will update it.
[img]
IVA ok mirrors
[/img]
I should point out the picture is taken of the mirrors as they come out of the box, the mirror head should be rotated 180 degrees to the head for the
correct orientation, they'd look a bit strange when fitted otherwise!
Thanks Russ - you have a PM
I passed the IVA with these, or ones remarkably similar, only bitch was one had M8 LH thread, with no nuts(?) provided. They are good and don't vibrate too badly.
I can assure you mine both have 10mm thread!
quote:
Originally posted by 40inches
quote:
Originally posted by Stott
I understand you may be talking about the glass size, however at 6"x4" it's bound to be ok, but I thought I'd mention again for all those reading that exterior mirrors are exempt from the exterior projections test at IVA.
Section 16: Exterior Projections, Page 120/282 "The assessment will not apply to exterior mirrors"
Plenty of examiners pick people up on this but it's another case where they should read the book thoroughly first.
ATB
Stott
Can you be more specific on the exact location in Section 16?
I have IVA version:6.01 09/05/2011 running from pages 131 to141 and can't find the "The assessment will not apply to exterior mirrors" part.
quote:
Originally posted by stevegough
quote:
Originally posted by 40inches
quote:
Originally posted by Stott
I understand you may be talking about the glass size, however at 6"x4" it's bound to be ok, but I thought I'd mention again for all those reading that exterior mirrors are exempt from the exterior projections test at IVA.
Section 16: Exterior Projections, Page 120/282 "The assessment will not apply to exterior mirrors"
Plenty of examiners pick people up on this but it's another case where they should read the book thoroughly first.
ATB
Stott
Can you be more specific on the exact location in Section 16?
I have IVA version:6.01 09/05/2011 running from pages 131 to141 and can't find the "The assessment will not apply to exterior mirrors" part.
I don't know why you are worrying about it, 40inches? By the time you are ready for IVA, everybody will be getting around in "Star Wars" type speedsters