Board logo

Fog Light Switch
maskell01 - 10/10/10 at 05:55 PM

Does the fog light switch have to:-
A) Illuminate

and

B)have the fog light symbol on the button?


Cheers

Aaron

adithorp - 10/10/10 at 06:08 PM

No and no. There must be a red warning light displaying the correct symbol on the illuminated surface when the light is on. The switches should all be marned with the use.

[Edited on 10/10/10 by adithorp]

maskell01 - 10/10/10 at 06:49 PM

i dont think i have i corresponding light????
not one on the bright 6 anyway!

if not would i need both then?

stevegough - 10/10/10 at 06:53 PM

fit a foglight switch with a light in it....

I have bright 6 and an illuminating foglight rocker - how about this offering from CBS?

foggy sw

maskell01 - 10/10/10 at 06:56 PM

Yeah i think you are right steve, it probably will come to that!

im over thinking the matter........damn pretty neon buttons!

iank - 10/10/10 at 07:26 PM

quote:
Originally posted by adithorp
No and no. There must be a red warning light displaying the correct symbol on the illuminated surface when the light is on. The switches should all be marned with the use.

[Edited on 10/10/10 by adithorp]


It's a yellow, not red light for the rear foglight (green if you have front fogs).

Which interestingly means the CBS switch isn't compliant for IVA (Section 33, Table A) without a separate tell-tale.

[Edited on 10/10/10 by iank]

stevegough - 10/10/10 at 08:39 PM

I bought mine from CBS, but it was an orange light - see pic.


Description
Description

[Edited on 10/10/10 by stevegough]