Hi I am just looking at the Sierra pedal set and I am wondering how any of you have fitted them, I am building a Locost from the book. Any good photos you could point me at and advice would make my bank holiday Monday a little less frustrating

Many thanks

[Edited on 29/8/10 by Kartdad]

I've got some in my earlier picture in my gallery (link below) before I changed to floor mounted pedals.

Cheers

Rich

try this one

Sierra Pedal Box

..and just before SVA


Description

I shortened my pedals, (see attached), and set the pedal box almost level with the top of the frame. If you trawl through some of my archive you will see how in more detail. HTH Ray


Pedal mod's.

I used the std sierra MC so shortening the pedals would have increased the pedal effort beyond the SVA acceptable limit

Ah! good point Mark, my car is fitted with the donors power brakes so pedal ratio no problem. Ray