Rescued attachment finnished.JPG
1
Rescued attachment finnished.JPG
2
Rescued attachment finnished.JPG..JPG
3
Rescued attachment finnished.JPG....JPG
4
Rescued attachment finnished.JPG..J.JPG
5
Rescued attachment finnished.JPG..JP.JPG
6
Rescued attachment finnished.JPG..JP.JPG..JPG
looks very good.
one things, don't you need head restraints?
Nice!
Did you correct the deliberate mistake? 
Make sure you've got a screw driver for the headlight covers incase the alignment needs tweeking.
Did you get the speedo calibrated?
Good luck.
adrian
Did you wind the preload up at the front to alter the ride height for the headlight height?
Only thing I can spot is the very bottom of the handbrake lever, will its edge fall foul of the globe of doom?
All that lying upside down in the cockpit will be worth it when its done! 
Very nice 
Good luck tomorrow
is the rear view mirror off a bmw mini?
car looks good btw!
quote:
Originally posted by dan__wright
looks very good.
one things, don't you need head restraints?
quote:
Originally posted by adithorp
Nice!
Did you correct the deliberate mistake?
Make sure you've got a screw driver for the headlight covers incase the alignment needs tweeking.
Did you get the speedo calibrated?
Good luck.
adrian
Think the head restraint thing comes in for IVA?
quote:
Originally posted by Dangle_kt
Did you wind the preload up at the front to alter the ride height for the headlight height?
Only thing I can spot is the very bottom of the handbrake lever, will its edge fall foul of the globe of doom?
All that lying upside down in the cockpit will be worth it when its done!
quote:
Originally posted by Hammerhead
is the rear view mirror off a bmw mini?
car looks good btw!
good luck tomorrow! what are the wheels/tyres??
looks good 
good luck tommorrow
Nice job - good luck!
very nice
rear indicators?
bottom of fibreglass sharp edge above the dash, and back of seat.
the grill opening isn't more than 100mm is it?
2 anti-theft devices?
seat belts 1 handed operation?
nice work,
Matt
p.s. nice colour :-)
[Edited on 5/3/09 by matt_gsxr]
is he going to be picky on seatbelts rubbing on roll bar cross member. good luck
tony
quote:
Originally posted by welderman
quote:
Originally posted by dan__wright
looks very good.
one things, don't you need head restraints?
urm dont know, do it?.
Looks superb Joe, bet you're proud!
All the very best for tomorrow mate
Fingers crossed dot dot dot dot dot
just noticed the post in wanted......they don't like sticky on reflectors
tony
M E H
Stickies will get you through at Chadderton. I had the round ones which failed on the edges so I showed him some oval sticky ones that I had in my bag and he said they would be fine.
well done joe superb work, are you going to chadderton? spoke to a tester called david from their last week superb chap was very helpful and friendly
if you get him you will be fine im sure. he couldnt have been more helpful was really interested in my car and couldnt stop giving me advice
good luck
chris
looks great. all the best tomorrow!!
Looking good - I'v gone for the smaller seats too, but, should edging be all around?
Oh yes - you forgot the gearlever!
All the best for the morning
Looking good Joe best of luck for tomorrow!
Nowt wrong with stick reflectors.
Good luck, you'll fly it!
Nowt wrong with stick reflectors.
Good luck, you'll fly it!