right ive drilled holes etc for my lights now, ive also asked a coulpe of locosters this but thought i would put it to others.
Im concerned that the lines on the glass lamps are not perfect, as in level vertical and horizontal, do they have to be perfectly level or as mine are
a bugs di(k out. And i mean a bugs whisper, not loads.
[Edited on 20/1/09 by welderman]
If you're that close you'll be OK. I did mine by eye.
adrian
Adrian, do you do mot's. Once its all road worthy i would like a ride out, and that would be a good shake down.
Unfortunatly not mate.
adrian
ah well, did you get an mot first
No, didn't mot first. Didn't see the point as I could run through it anyway apart from the brake test (not the same as SVA brake test
anyway) and emmisions and I also ran out of time. If you do go for one, get them to just go through the motions and not actually log it onto the test
computer; once on the system it needs test every 12 months.
adrian
do you know of a friendly mot station near you, if you get the idea
looks like a frog
Rescued attachment front frog like.jpg
Joe - Are you doing internal indicators in the headlight pods or somewhere else on the nose?
ye internal in /under the light covers , got some motor bike ones, will take a picture tomorrow with then just sat on.
Also has the cut out for the front grill, but decided to stop after i had an accident with the jig saw and decided to see if i could cut my thumb
off.
.
Needless to say i said some very rude words.
[Edited on 18/1/09 by welderman]
quote:
Originally posted by welderman
looks like a frog
quote:
Originally posted by welderman
looks like a frog
late night last nigth and early morning
Rescued attachment front lights.jpg
What was that joke about "Wide mouth frogs"?
adrian