Dave Bailey
|
| posted on 6/9/08 at 05:58 PM |
|
|
Some progress BUT!
Still on target I think to get done before IVA however I had a bit of a think today and I wonder if I have made a mistake with the heater matrix pipes
being a bit near the wiring panel. I know there is not much room but what do you think?
Silicon in the background is the outlet from the heater rad.
 
Wiring Scuttle 2
 
Wiring_Scuttle
 
FIA Isolator
 
ST170 Engine
|
|
|
|
|
mackei23b
|
| posted on 6/9/08 at 06:04 PM |
|
|
Looks OK to me, as long as nothing is directly touching the heater pipes.
Good looking build.
Cheers
Ian
|
|
|
Humbug
|
| posted on 6/9/08 at 06:09 PM |
|
|
If you are a bit worried you could lag the pipes with some heatshield matting stuff?
|
|
|
rusty nuts
|
| posted on 6/9/08 at 06:31 PM |
|
|
Should be fine unless you have a leak. Is the back of the heater blower going to clear the dash?
[Edited on 6/9/08 by rusty nuts]
|
|
|
jacko
|
| posted on 6/9/08 at 06:41 PM |
|
|
Just a warning about heater pipes some one on here had a bad accident when a pipe came off and scalded there feet and legs
Jacko
|
|
|
coozer
|
| posted on 6/9/08 at 06:54 PM |
|
|
Looks OK, nice engine by the way
1972 V8 Jago
1980 Z750
|
|
|
BenB
|
| posted on 6/9/08 at 07:08 PM |
|
|
Personally I'd keep the heater radiator out of the scuttle. As already said a hose coming off would be seriously bad....
|
|
|
MK chippy
|
| posted on 6/9/08 at 07:56 PM |
|
|
Heating! in a locost! tsssssssssss!!!
|
|
|
Dave Bailey
|
| posted on 6/9/08 at 10:30 PM |
|
|
I'm afraid er in doors wouldn't go in it without a screen and heater....
I may box in the pipes and make a drain for it later.... Need to focus on getting it through SVA!
Dave B
|
|
|
omega0684
|
| posted on 7/9/08 at 07:35 AM |
|
|
how big is the TURBO?
|
|
|
Dave Bailey
|
| posted on 7/9/08 at 08:42 AM |
|
|
No Turbo 'yet'! It is an ST170 engine with Dry sump and throttle bodies.
Thanks
Dave B
[Edited on 7/9/08 by Dave Bailey]
[Edited on 7/9/08 by Dave Bailey]
[Edited on 7/9/08 by Dave Bailey]
|
|
|
.jpg){kind=avatar}
.jpg)
