jollygreengiant
|
| posted on 30/7/08 at 08:11 PM |
|
|
New bits arrived today
Well I received the new bits I had been waiting for today.
Anyone want to guess where they fit.
 
My new bits
Those who might already know should not post.
Oh and thanks Dave they will be perfect.
Edit bit - if you want to copy the design ask but if some one starts mass producing them then I hold all rights of general design &
manufature.
[Edited on 30/7/08 by jollygreengiant]
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
|
|
BenB
|
| posted on 30/7/08 at 08:15 PM |
|
|
quote:
Originally posted by jollygreengiant
Anyone want to guess where they fit.
Do they need batteries?? 
|
|
|
thunderace
|
| posted on 30/7/08 at 08:26 PM |
|
|
indicator and light stalks
|
|
|
nib1980
|
| posted on 30/7/08 at 08:28 PM |
|
|
throttle feed for the jet engine?
|
|
|
chris_smith
|
| posted on 30/7/08 at 08:33 PM |
|
|
indicator extensions??
|
|
|
COREdevelopments
|
| posted on 30/7/08 at 08:34 PM |
|
|
stunt pegs for your rally burner?
|
|
|
Mr G
|
| posted on 30/7/08 at 08:35 PM |
|
|
bmx stunt pegs
Normal is getting dressed in clothes that you buy for work and driving through traffic in a
car that you are still paying for - in order to get to the job you need to pay for the clothes
and the car, and the house you leave vacant all day so you can afford to live in it.
|
|
|
r1_pete
|
| posted on 30/7/08 at 08:35 PM |
|
|
Handles for the pillion on Chris' avatar.....
|
|
|
jollygreengiant
|
| posted on 30/7/08 at 08:37 PM |
|
|
quote:
Originally posted by thunderace
indicator and light stalks
Ok so they go on these
 
Go on these
Like this
 
Like this
and will go into my indicator extension bar ( doubles as a bumper bar) to be clamped in by some grub screws from behind
 
into indicator bar
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
Dangle_kt
|
| posted on 30/7/08 at 08:44 PM |
|
|
will that mean you don't need to have mr SVA dreaded globe rattling round the front suspension?
|
|
|
eznfrank
|
| posted on 30/7/08 at 08:54 PM |
|
|
quote:
Originally posted by r1_pete
Handles for the pillion on Chris' avatar.....
or Handles for the pillion on CoreDevelopments avatar!!!
|
|
|
jollygreengiant
|
| posted on 30/7/08 at 10:18 PM |
|
|
quote:
Originally posted by Dangle_kt
will that mean you don't need to have mr SVA dreaded globe rattling round the front suspension?
Hopefully that is the general idea. But you know the testers usually have other ideas.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
02GF74
|
| posted on 31/7/08 at 08:12 AM |
|
|
hope you are using one tube for the bar or have fairly hefty mounts - the legnth means they will wobble quite a bit.
|
|
|
jollygreengiant
|
| posted on 31/7/08 at 09:29 AM |
|
|
quote:
Originally posted by 02GF74
hope you are using one tube for the bar or have fairly hefty mounts - the legnth means they will wobble quite a bit.
Yep approx 1inch steel tube in one piece across the top of the nose. It will be bolted either side of centre (bolts to also hold grille in) through
rubber grommets in nose cone sides and just inside of nose the bar will have electrical condiut exit routes each side that will assist the bar in
deforming 'should' anything make hard enough contact so that damage to the nose would be minimalised.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
rusty nuts
|
| posted on 31/7/08 at 08:07 PM |
|
|
I thought they might have been larger jets for the "pink barbie"
|
|
|
.jpg)
