Paul (Notts)
|
| posted on 18/11/06 at 06:22 PM |
|
|
RV8 alternator bracket
Anyone got any pics of the bracket they have used to fit the alternator.
I currently have a bracket off a landrover which mounts the alternator on the passenger side but a bit too far out. the plan is to alter it but I have
notice that other people seem to have the alternator on the drivers side.
Cherrs
Paul
|
|
|
|
|
Simon
|
| posted on 18/11/06 at 08:24 PM |
|
|
Paul,
HAve a look in my archive, there's a few pics of the one I made. Gonna bin sometime and mount on the lower left side (where the PS pump would
be).
http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=2004_0109Image0003.JPG
HTH
ATB
Simon
|
|
|
Paul (Notts)
|
| posted on 19/11/06 at 06:54 AM |
|
|
thanks
|
|
|
Agriv8
|
| posted on 19/11/06 at 10:25 AM |
|
|
paul,
I think i used an sd1 one.
Chopped the part that it would normally mount on off and re-drilled the bracket to mount it firther inboard.
Will take a better photo later today.
here is how it look from a little further away.
 
new engine in
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
darrens
|
| posted on 25/11/06 at 09:28 AM |
|
|
I also had to make one, see attached,
 
Rescued attachment DSCF0729-med.JPG
|
|
|
