Johnmor
|
| posted on 10/8/20 at 08:44 AM |
|
|
Viento Fuel Tank
Hi All
Anybody got a reccomendation for someone to produce an alloy fuel tank for my Viento
Im in the NE Scotland so somewhere up here would be usefull but not essential
Given the size of the car and its V8 engine i was hoping for something around 40l , the standard fuel tanks are a bit small, ive got the space in the
rear of the car.
I got one made from a guy in Peterhead for my last Viento but that was 14 years ago and i cant find him
Thanks in advance
john
|
|
|
|
|
big_wasa
|
| posted on 10/8/20 at 05:08 PM |
|
|
I was surprised how small they are as well. Looks smaller than the one in the Locost.
I’ve bought a Locost sized one from this guy on eBay eBay Item
Cheap and cheerful with no leaks.
There are other firms.
There is a guy on here, user name deno.
There is Obp near me that originally made the Viento.
I would be interested in what you go for as I will want one for mine. It’s been butchered a few times with different senders.
|
|
|
knight19770
|
| posted on 11/8/20 at 08:52 AM |
|
|
HI John,
Where about in the North east are you? i'm in Inverbervie and currently building a Viento. I dont suppose you have done a dash panel yet? Was
wandering if anyone has bought any of the grp blank panels from the kit car sites, and if they will fit the larger Viento?
Thanks Mike
|
|
|
big_wasa
|
| posted on 11/8/20 at 09:38 AM |
|
|
My local fibre glass guy said he would have a go at a wider one for me. But the standard sized locost / mk one is know where near.
https://www.ebay.co.uk/itm/312804029360
[Edited on 11/8/20 by big_wasa]
|
|
|
Johnmor
|
| posted on 11/8/20 at 03:29 PM |
|
|
Hi , I'm near Alford
This is my second viento ( glutton for punishment )
The last dash I built used 6mm marine plywood and covered with foam then vinyl , came out ok and met the requirement for the soft edge around
drivers knees, it's also easy to work and if you screw up it's cheap to replace
You got a fuel tank yet?
John
|
|
|
big_wasa
|
| posted on 11/8/20 at 03:46 PM |
|
|
Can I ask what seats you guys are using ?
|
|
|
jollygreengiant
|
| posted on 11/8/20 at 05:08 PM |
|
|
I made a buck up out of chipboard and Trev Davis made the tank out of alli for me. chipboard buck :-
 
Locost fuel tank ?
Finished Tank :-
 
Fuel Tank pornography 1
It did just fit in through the top of the boot and was about 12 gallons. with an anti surge pot on the bottom with the fuel take off.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
Johnmor
|
| posted on 11/8/20 at 06:07 PM |
|
|
That looks the business,
My engine is not fuel injected so just need an 8mmm outlet and a level guage hole,
12 gallon is plenty big enough
John
|
|
|
jollygreengiant
|
| posted on 11/8/20 at 06:34 PM |
|
|
quote:
Originally posted by Johnmor
That looks the business,
My engine is not fuel injected so just need an 8mmm outlet and a level gauge hole,
12 gallon is plenty big enough
John
The fuel out from the bottom via an extra little pot, just means that IF you are throwing the car around enthusiastically, then the car wont splutter
through fuel shortage in prolonged lateral "G". regardless of injection or carb.
I formed the buck using (if I remember correctly) using 12" chipboard for the base and top, 15" chipboard for the back, front and sides.
Then recessed the back piece by about 1/2" and flushed either side of the back panel upright tubes (to provide some later fixing of the tank,
plus straps). when buck was built in the car in position, then just lift out.
For the fuel sender I used a standard sierra/Granada unit mounted into a fuel tank sender mount recovered from a scrap tank, this mounting plate was
then bolted (with a gasket) to the alloy tank. Injected senders have the fuel outlet sealed. Then fit fuel return pipe and filler neck.
With the description above and my pictures you should be able to work it all out.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
knight19770
|
| posted on 12/8/20 at 08:04 AM |
|
|
Hi John,
I got mine from a guy on ebay that made them to order, I just gave him my dimensions and where i wanted the outlets and he did a great job at a
reasonable price. I will keep searching through my emails to see if i can find his details. Wasa i haven't bought seats yet, was going to be
getting the set from Scottish kit car centre, they have some real smart ones at good prices. I would prefer to buy a dash panel rather than make one,
if anyone knows of one that will fit? also what headlights have you bought for your kits? Not sure what size of headlights were on the original kit?
Thanks Mike
|
|
|
Johnmor
|
| posted on 12/8/20 at 08:47 AM |
|
|
Hi Mike
I have a pair of black Mamba Seats with adjustable runners as theres plenty of room in the cockpit ,
The headlights I used last time were black bowl 7" headlights, they had the appropriate markings for IVA test and were ok to fit, not sure if
I'll use the same as the last car was 14 years ago and lights have moved on a bit with LED options.
[img]pg]15356[/pg[/img]
|
|
|
big_wasa
|
| posted on 30/5/21 at 11:21 AM |
|
|
Did you get one made ?
I am going to need one. The guy that built mine used a 5~6 gallon Locost sized one and its knackered. Looks like the car has slipped of a trolley jack
onto the tank. 
5 gallon with a 3.0 v6 
|
|
|
darrens
|
| posted on 5/7/21 at 12:31 PM |
|
|
These guys built a 10Gal tank for me:
https://www.alloyracingfabrications.com/
Sent them the design
|
|
|
big_wasa
|
| posted on 5/7/21 at 05:49 PM |
|
|
Thanks,
Any chance you can remember the dimensions you used please ?
Cheers warren.
|
|
|
jollygreengiant
|
| posted on 5/7/21 at 11:34 PM |
|
|
quote:
Originally posted by big_wasa
Thanks,
Any chance you can remember the dimensions you used please ?
Cheers warren.
I made a buck out of chipboard, and with careful sizing it did just fit in through the top, sourced a Sierra/Granada injection tank sender unit (with
the hole it fits into which I bolted in and used petropatch to seal) and a swirl pot/take off on the bottom of the tank.
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
