matt5964
|
posted on 22/2/14 at 03:14 PM |
|
|
not booked it in yet as not got a date for the engine to return, then I will have to put 400 ish miles on it before I get it mapped.
ive heard good thing about emerald remaps
|
|
|
matt5964
|
posted on 4/4/14 at 06:35 AM |
|
|
Finally got time to get the engine in and plumbed back up as have been waiting for parts... the relief when she fired up was immense..lol
hoping to get out on the road tonight for a test drive to see if there are any leaks and get some miles slowly on so I can book in for remap and new
injectors..
Should not take long for me to put 4-600 miles on..
|
|
matt5964
|
posted on 27/4/14 at 11:45 AM |
|
|
half way through engine running in and it pulls nicer than it did before and is a lot louder...
Decided to take the plunge and get a full Simpson Race exhausted made for the car...
Dash2 to be fitted still .
Thinking of the injectors would these be any good for my application?
http://www.jenvey.co.uk/home/accessories/fuel-system/jenvey-dynamics/pico-fuel-injector-330cc-in47-330
|
|
matt5964
|
posted on 15/5/14 at 04:53 PM |
|
|
just a quick update...
fitting the Dash2 on Saturday..
booked in for second week June for Full Simpson Racing Exhaust
Then booked into Emerald for a Mapping session and new injectors on 1st July...
|
|
matt5964
|
posted on 13/6/14 at 05:52 PM |
|
|
A quick update, Just got back from Simpson Race Exhausts...
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10423819_645439978879935_5383456274210560696_n.jpg
https://scontent-a-lhr.xx.fbcdn.net/hphotos-xaf1/t1.0-9/10406493_645440018879931_7597933575242980335_n.jpg
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-xpf1/t1.0-9/10462980_645439948879938_2409516337991101116_n.jpg
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-xpa1/t1.0-9/10440660_645439902213276_492862295218491213_n.jpg
the craft and workmanship is amazing, and the guys are all fantastic... well worth the trip
Just need to get the wheel speed sensor working on the Dash 2
then off to emerald on 1st July for a remap
Have booked Cadwell on the 5th July and Rockingham on 18th July to test the upgrades fully.
|
|
matt5964
|
posted on 1/7/14 at 05:54 AM |
|
|
The day of reckoning has arrived... Off to watton to see emerald for a new set of injectors and a full session setting it up
|
|
matt5964
|
posted on 1/7/14 at 06:26 PM |
|
|
quote: Originally posted by matt5964
The day of reckoning has arrived... Off to watton to see emerald for a new set of injectors and a full session setting it up
Well we ended up with 221.3 bop and 178.9 lbft.
Really happy with the result as it is very driveable and the noise in infectious, Dave and john at emerald have done a cracking job highly recommended
|
|
mccsp
|
posted on 1/7/14 at 07:02 PM |
|
|
Sounds good, what was it when you first arrived at Dave's?
What intake set-up are you running?
Is it possible I have seen you in Yaxley on the Ferndale estate?
Why do it the easy way, when I can do things my way!
|
|
matt5964
|
posted on 1/7/14 at 07:07 PM |
|
|
quote: Originally posted by mccsp
Sounds good, what was it when you first arrived at Dave's?
What intake set-up are you running?
Is it possible I have seen you in Yaxley on the Ferndale estate?
Yes we live on the Ferndale estate... Spooky are you on broadway...?
Jenvey throttle body's and 45x 90 trumpets, 320 ev16 bosch injectors and a pipercross 105mm filter
When we got it std exhaust and std injectors about 165bhp
Exhaust and ported head custom cams but still standard fuleing and 45x60 trumpets was circa 185bhp
|
|
mccsp
|
posted on 1/7/14 at 07:32 PM |
|
|
Hi,
I am also on Ferndale.
Thought I saw a car that may well have been yours passing the co-op a few weeks ago.
Small world.
[Edited on 1/7/14 by mccsp]
Why do it the easy way, when I can do things my way!
|
|
matt5964
|
posted on 1/7/14 at 07:42 PM |
|
|
Kewl was most prob us, have to pop over if you want to see the injection side of things, fellw owners always welcome.
We are taking it to Cadwell on Saturday and rockingham on the 18th to get to grips with out new found pony's
|
|
matt5964
|
posted on 3/7/14 at 06:18 AM |
|
|
[Edited on 3/7/14 by matt5964]
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
mccsp
|
posted on 3/7/14 at 08:35 PM |
|
|
Good luck at Cadwell tomorrow. Have you been before? Just build up gently. Having visited the barriers at Cadwell in the past, I know how well they
can bite.
Why do it the easy way, when I can do things my way!
|
|
matt5964
|
posted on 3/7/14 at 08:45 PM |
|
|
We went to Cadwell September last year, defiantly will be building up as lest time we had half a pack of pony's less to play with. Looks like
there is going to be showers so hall bends will be interesting to say the least
If you can let me know how to post vides I have a few from emerald.
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
matt5964
|
posted on 6/7/14 at 07:58 PM |
|
|
Cadwell went really well, started off a bit dicey and very wet... Not the ideals senates to learn the car in, some rabbit nose moments. Then it
cleared up, had a few issues. The clutch needed adjusting as I could not get clean gears when hot or under high load, this was fixed with adjustment
of the cable and peddle . The second issue was a little more prohibiting the dash 2 went crazy and failed, look like it's not as waterproof as
it should be so I had no telemetry, not ideal with the new engine spec meaning I had no idea of water temp,oil pressure or temp, no rev counter nor
speed.. So had to be ginger even when the track was dry but this did not detract from a very good day, hope fully race technology will be reasonable
about the situation and turn it round befor 18th July ready for rockingham.
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
Dave Bailey
|
posted on 6/7/14 at 08:08 PM |
|
|
The dash 2 failure is a bit of a concern... I have one of the very early ones.. Not been out in the wet yet...
Dave B
|
|
matt5964
|
posted on 6/7/14 at 09:54 PM |
|
|
quote: Originally posted by Dave Bailey
The dash 2 failure is a bit of a concern... I have one of the very early ones.. Not been out in the wet yet...
Dave B
Mine is only a couple months old, and first time out in rain.
I will let you know what they say.
I have just tried it out after keeping it in the airing cupboard over night and it seems to read ok now
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
Dave Bailey
|
posted on 7/7/14 at 06:34 PM |
|
|
Ok thanks
Dave B
|
|
matt5964
|
posted on 7/7/14 at 07:10 PM |
|
|
quote: Originally posted by Dave Bailey
Ok thanks
Dave B
well I called RT this morning and it seemed not to be a surprise to them, they are having the unit back to reseal and replace any damaged parts, only
downer is that I wont have it back for at least a week so now use of the car this weekend..but it will be back ready for the 18th and Rockingham.
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
matt5964
|
posted on 11/7/14 at 09:19 PM |
|
|
Got a call from rt will receive dash on Monday .. Rockngham is a go..
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
matt5964
|
posted on 19/7/14 at 08:25 AM |
|
|
dash went in well, started the car and it ran a bit rough... after speaking to emerald it seems I will need to trim up the cold start a bit, once warm
the car runs silky smooth.
Had a good day at Rockingham day started very wet and slippery, gave myself a big scare coming out of Tarzan big tank slapper both ways, funnily
enough the 911turbo behind me was quite scared too. just before lunch things started to warm up nicely, then after lunch it went very hot and dry.
my wife and I both had a lesion in the afternoon and well it was the best £60 I have ever spent, really pleased with the confidence and understanding
of the car it gave us. just need to practice more..oh well another excuse to book a track day for August.
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
matt5964
|
posted on 28/7/14 at 05:28 PM |
|
|
We have booked a traqck day at Bedford with MSVT 16th Aug, anyone on here going??
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
Andybarbet
|
posted on 28/7/14 at 08:01 PM |
|
|
We need some engine bay pics, well, just to give me some inspiration really, the car looks great.
Give a man a fish & it will feed him for a day, give him a fishing rod & you've saved a fish.
|
|
matt5964
|
posted on 31/7/14 at 06:37 PM |
|
|
quote: Originally posted by Andybarbet
We need some engine bay pics, well, just to give me some inspiration really, the car looks great.
Thank you
here are some shots, just holla if you want a pic of something in particular
exhaust1
exhaust2
exhaust3
exhauls4
exhaust5
exhaust6
exhaust8
engine1
engine2
engine3
[Edited on 31/7/14 by matt5964]
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|
matt5964
|
posted on 31/7/14 at 06:41 PM |
|
|
not sure it this link will work
https://www.facebook.com/matthew.redman.39/media_set?set=a.10152625840336477.1073741837.575776476&type=1
https://www.facebook.com/matthew.redman.39/media_set?set=vb.575776476&type=2
https://www.facebook.com/photo.php?v=654906527933280&set=vb.100002418162849&type=2&theater
https://www.facebook.com/photo.php?v=654903401266926&set=vb.100002418162849&type=2&theater
[Edited on 31/7/14 by matt5964]
Luego velocity XT 2.0ltr 221.3bhp 178.9lbft
|
|