badding
|
| posted on 10/7/07 at 10:42 AM |
|
|
ZX9R speedsensor mounting??
Hello
Does anyone has any pics how they mounted the sensor on their car, I´m in the progress of mounting mine.
[Edited on 10/7/07 by badding]
|
|
|
|
|
rpm
|
| posted on 10/7/07 at 07:18 PM |
|
|
see if these help, they take a bit of deciphering, 1st from rear below ,second looking rearward to the tunnel cheers Roger reverse what i said
above!!!
[Edited on 10/7/07 by rpm]
 
Rescued attachment indy finished 025.jpg
expert
ex= a has been
spurt= a drip under pressure
|
|
|
rpm
|
| posted on 10/7/07 at 07:20 PM |
|
|
how do you do the multiple pics?!!!
 
Rescued attachment indy finished 019.jpg
expert
ex= a has been
spurt= a drip under pressure
|
|
|
mistergrumpy
|
| posted on 10/7/07 at 07:47 PM |
|
|
Is that a bolt you've put into the adaptor flange? Are there not any issues with balancing problems?Why have the prop all balanced then bolt a
top heavy flange to it? Hmmm?
|
|
|
badding
|
| posted on 11/7/07 at 06:31 AM |
|
|
Did you use one or more bolts to get a correct reading on the speedo..
And as mister grumpy said, how about the balancing ??. I think you have to equally mount 2 bolts to the prop.
[Edited on 11/7/07 by badding]
[Edited on 11/7/07 by badding]
|
|
|
rpm
|
| posted on 11/7/07 at 06:20 PM |
|
|
I've got 3 equally spaced bolts all drilled and mounted to give balance. 3 bolts gave a speedo reading at sva within limits so i didn't
really need my speedohealer
|
|
|
