kastrato
|
| posted on 15/4/07 at 10:55 PM |
|
|
blade exhaust
I was looking on ebay and I cant find a decent exhaust can for my 1995 blade.
Ican find loads for 1996-1999 models.
Can these fit on my blade or has to be specific for 1995 model?
Does anybody knows a place where I can find a decent exhaust can for my blade? I prefer it in carbon.
Thanks in advance
MK INDY fireblade
|
|
|
|
|
kastrato
|
| posted on 16/4/07 at 01:52 PM |
|
|
I noticed that nobody reply, maybe my query is stupid. Please forgive me I am new to this ...
MK INDY fireblade
|
|
|
zxrlocost
|
| posted on 16/4/07 at 01:58 PM |
|
|
hi
any exhaust can with a similar internal diameter will do
2" I think
make sure the end isnt aiming at your back arch though
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
kastrato
|
| posted on 16/4/07 at 04:57 PM |
|
|
thanks for the reply!
MK INDY fireblade
|
|
|
ASH3
|
| posted on 16/4/07 at 09:56 PM |
|
|
Should you find one that says NOT FOR ROAD USE drill the rivets out turn it round n pop it back on and use ear plugs 300 mile round trip to Detlin
and my ears are still ringin but wat a sound
|
|
|
kastrato
|
| posted on 16/4/07 at 11:50 PM |
|
|
Hello there,
How you drill it? Do you have any pics?
How you stick it back on?
MK INDY fireblade
|
|
|
paublo999
|
| posted on 17/4/07 at 10:45 AM |
|
|
Hi,
I bought a modified R1 carbon can for my blade off ebay with the exit pipe modified to miss the arch, very quiet etc....
The only problem was that I had to rejet the carbs to get rid of the missfire after... dont forget that additional back pressure will mean that it
needs to run a bit leaner... 
What exhaust do you currently have and has the engine been dynojetted? Do you need the car to be quiet for trackdays etc... I will sound awesome with
a straight through exhaust, but may not pass the noise tests... If the can is not marked road legel it wont pass SVA and the MOT man might get a bit
$hitty with you..
Cheers
Paul.
|
|
|
kastrato
|
| posted on 17/4/07 at 04:30 PM |
|
|
I think I have a standard mk indy exhaust can
 
Rescued attachment bec2_1.jpg
MK INDY fireblade
|
|
|
