roadrunner
|
posted on 28/3/07 at 07:33 PM |
|
|
zx9r bolt sizes
As above, does anyone know the thread size for the 12mm bolts.
Brad
|
|
|
Wadders
|
posted on 28/3/07 at 07:42 PM |
|
|
Most are metric fine, so with a 12mm head i'd hazard a guess at 8mm thread. Which bolts do you mean exactly?
Al.
Originally posted by roadrunner
As above, does anyone know the thread size for the 12mm bolts.
Brad
|
|
roadrunner
|
posted on 28/3/07 at 07:48 PM |
|
|
The two end mounting bolts.
Brad
|
|
mistergrumpy
|
posted on 28/3/07 at 07:51 PM |
|
|
U2U sent
|
|
tks
|
posted on 28/3/07 at 08:10 PM |
|
|
mhh
if the size of the bolts is known
please post..
its valuable info
Tks
The above comments are always meant to be from the above persons perspective.
|
|
russbost
|
posted on 28/3/07 at 08:17 PM |
|
|
M10 Fine I believe
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Wadders
|
posted on 28/3/07 at 09:03 PM |
|
|
You believe right, zx9 engine mounting bolts are indeed M10 fine
Originally posted by russbost
M10 Fine I believe
|
|
roadrunner
|
posted on 28/3/07 at 09:10 PM |
|
|
The two long bolts on the gearbox are 10mm, but when i tried one in the top mounting position, they just pass straight through.
front mounting points
It's the one on the left.
[Edited on 28/3/07 by roadrunner]
|
|
Peteff
|
posted on 28/3/07 at 11:18 PM |
|
|
Mine's like that. M12 goes through and a nut on the back.
Rescued attachment cradle3.jpg
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
mackei23b
|
posted on 30/3/07 at 01:42 PM |
|
|
I'm sure that m12 was too big for me
(I'm sure M11 is a standard size in Japan, but not Europe). I sleaved the hole and used M10.
Cheers
Ian
[Edited on 30/3/07 by mackei23b]
|
|
roadrunner
|
posted on 30/3/07 at 06:14 PM |
|
|
Bought some M12's today, fit perfectly, so to recap, zx9r 1998, M10 bottom bolts, and M12 top bolts.
Cheers fellas.
|
|