JoelP
|
| posted on 17/3/06 at 05:28 PM |
|
|
cutting the sprocket nut
collected my prop today, seems like the nut that hold on the prop adapter is too large, its trying to get into the universal joint. It needs cutting
down along the red line in the photo. This is not part of the nut that actually grips thread, so i figure theres no harm removing it, but equally,
theres no harm asking! What do you think?
Also, hows best to hold it on, seeing as its going to be hard to bend the locking washer back up. Will regular threadlock be up to it? I figure it
cant come off even with no nut as the prop hold it on, just dont want to make a mess of it. 
Cheers
 
Rescued attachment propnut.JPG
|
|
|
|
|
Wadders
|
| posted on 17/3/06 at 05:31 PM |
|
|
hacksawed mine off, IIRC tab washer is bendable, just., as you say it cant really go anywhere.
|
|
|
JoelP
|
| posted on 17/3/06 at 05:32 PM |
|
|
cheer alan. Mind if i pop down sometime?! I'll u2u you now
|
|
|
Jon Ison
|
| posted on 17/3/06 at 05:35 PM |
|
|
whip it off............
|
|
|
JoelP
|
| posted on 17/3/06 at 05:56 PM |
|
|
and off it came. cheers fellas! 
|
|
|
