keith
|
| posted on 6/8/05 at 09:06 AM |
|
|
sierra ign to zx9 ign
can any one out there help me with the correct wiring colours from sierra ignition to the bike ignition i have the 100 ohms resistor,but cant remember
where everything goes,this is the last job i need to do,after this its tidy up wires and polish like mad(well it is an avon body)cheers keith. 
|
|
|
|
|
Andy W
|
| posted on 6/8/05 at 09:29 AM |
|
|
Hi Keith
I've just looked at a few notes I did.
From what I can remember I got the power from the White in the bike loom. When the ignition is on this feeds +12v to the brown and +12v to the 100ohm
resistor connected to grey wire.
|
|
|
keith
|
| posted on 6/8/05 at 09:34 AM |
|
|
cheers andy,do you know where the grey w
ire goes that comes from bike loom. does it finish at the resistor.
|
|
|
Andy W
|
| posted on 6/8/05 at 09:38 AM |
|
|
The grey wire just needs connecting to the resistor and a 12v feed to it from the ignition. I think I used the 2nd postion on the key for this as you
need a feed that stays live when you're cranking the engine.
Andy.
|
|
|
keith
|
| posted on 6/8/05 at 09:48 AM |
|
|
thanks andy,will try this in a bit and will let you know how i get on,ps nice colour,
 
Rescued attachment kit car jan.jpg
|
|
|
keith
|
 posted on 6/8/05 at 12:29 PM |
|
|
still blowing fuses
can this wiring be explained a bit clearer,ie,where it goes on the sierra ign,i have brown from bike loom,white from bike loom and grey from bike,on
sierra ign,i have,red,black and yellow,blue and black,and yellow,doing my head in now
|
|
|
keith
|
| posted on 6/8/05 at 02:22 PM |
|
|
the engine lives again
thanks to you all,the engine now starts on the sierra ignition, hopefully see you all at donnington ps larry has just been round his car is fully
legal now,with an age related plate (A) looks and sounds grreat cheers keith.
|
|
|
