cfc999
|
| posted on 4/5/16 at 05:47 PM |
|
|
Bec Rad
Can anyone recommend a radiator for a zx9r powered striker.
Am I right in thinking early polo/micra might fit the bill.
Would this work (ebay item number 281632515387)
Cheers
Chris
|
|
|
|
|
russbost
|
| posted on 4/5/16 at 05:59 PM |
|
|
As long as you have the correct size & space to mount it in & inlet/outlet are in the right place then that should be fine, very similar to
what we use with the ZZR1400 - that's a good price too! 
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
zx12r dug
|
| posted on 4/5/16 at 06:35 PM |
|
|
Hi pal I had Martin keenan of mk engineering make my last two rads for previous builds tell him what size you require and he will make it to suit and
I think he's very reasonable with his prices.pics of my rad in archive hope this helps
[Edited on 4/5/16 by zx12r dug]
|
|
|
OliilO
|
| posted on 5/5/16 at 10:48 AM |
|
|
I've got an early micra rad on my blade engine. Seems to be sufficient for everything I've done so far, but it's not massively light
and quite expensive compared to a polo rad. I'd change to polo if I needed to do any replumbing/broke it.
|
|
|
peter030371
|
| posted on 5/5/16 at 10:59 AM |
|
|
I have just upgraded my Striker to an all allow radiator (2lt Duratec is going to produce a little more heat I think) and now have a spare Polo
radiator in very good condition. I guess its seen only a few hundred miles on the car, £20 including delivery and it has some angle brackets that may
or may not suit your Striker chassis (they seem to change rad mounts every other build!) and the fan switch?
U2U me your email address is you are interested and I will send some pictures to show the condition
|
|
|
cfc999
|
| posted on 5/5/16 at 11:57 AM |
|
|
Bec Rad
U2U sent Peter.
|
|
|
SausageArm
|
| posted on 10/6/16 at 02:18 PM |
|
|
I use one of these on my ZX10R Mac1, my mate used the same radiator on his CBR1000R engined Mac1 too.
HONDA CIVIC COUPE EM1 Si VTi SiR B16A 28MM PIPES FULL ALLOY RADIATOR 42mm core
|
|
|
40inches
|
| posted on 10/6/16 at 02:24 PM |
|
|
I used a Clio rad, inlet and outlet in just the correct place, no problems in 3000 miles.
 
Description
|
|
|
