R1 STRIKER
|
| posted on 23/10/11 at 08:41 PM |
|
|
Best Bike engine for new striker build?
Having sold my last BEC in 2007, it's time for another. My last BEC was a Raw striker R1. Whats the engine of choice these days? 08 cbr1000rr
looks a good choice or is the hayabusa still the daddy? It will be in another Striker chassis.
Open to ideas, a lots changed in last few years i'm sure!
Thanks
Ben.
|
|
|
|
|
Pat_T
|
| posted on 23/10/11 at 08:59 PM |
|
|
I would say (as a powertrain design engineer for Triumph) that the BMW S1000rr engine is the daddy at the moment!
Engines from crashed bikes still seem to be fetching £3000 on ebay though, and getting the electronics to be happy in a car might be challenging as
all the TC systems are controlled from a gyroscope!!
www.instagram.com/patroclueus
|
|
|
fazerruss
|
| posted on 23/10/11 at 09:18 PM |
|
|
quote:
Originally posted by Pat_T
I would say (as a powertrain design engineer for Triumph) that the BMW S1000rr engine is the daddy at the moment!
Engines from crashed bikes still seem to be fetching £3000 on ebay though, and getting the electronics to be happy in a car might be challenging as
all the TC systems are controlled from a gyroscope!!
Shame on you, whats wrong with going British!
My Triumph power plant works superb. I cant recommend it enough. It is fantastic on my Triumph frame, wheels. tank,seat, handle bars ect..... 
"if assholes could fly this place would be an airport"
|
|
|
stevebubs
|
| posted on 23/10/11 at 09:24 PM |
|
|
quote:
Originally posted by fazerruss
quote:
Originally posted by Pat_T
I would say (as a powertrain design engineer for Triumph) that the BMW S1000rr engine is the daddy at the moment!
Engines from crashed bikes still seem to be fetching £3000 on ebay though, and getting the electronics to be happy in a car might be challenging as
all the TC systems are controlled from a gyroscope!!
Shame on you, whats wrong with going British!
My Triumph power plant works superb. I cant recommend it enough. It is fantastic on my Triumph frame, wheels. tank,seat, handle bars ect.....
Triple in the challenger went ok...
|
|
|
StevieB
|
| posted on 23/10/11 at 09:32 PM |
|
|
I think you pay a lot for the name with the Busa - most litre superbike engines are putting out 180bhp or more.
I've heard that the later big bang R1 units are pretty good.
If you want something a bit different, and can afford/find one, the v4 from the latest Aprilia RSV Mille would be good.
|
|
|
franky
|
| posted on 23/10/11 at 09:38 PM |
|
|
quote:
Originally posted by StevieB
I think you pay a lot for the name with the Busa - most litre superbike engines are putting out 180bhp or more.
I've heard that the later big bang R1 units are pretty good.
If you want something a bit different, and can afford/find one, the v4 from the latest Aprilia RSV Mille would be good.
The big bang r1 units are about 20bhp down on everything else
|
|
|
adithorp
|
| posted on 23/10/11 at 09:52 PM |
|
|
cbr1000rr seems to be the engine of choice in RGB this year. Plenty of cars been swapped over to it this year.
06 R1 works well but there's been problems with the 08 in cars and the big-bang R1 gives less but more usable power in the bike, but thats not
needed in a car (so just less power).
BMW s1000rr would be a monster by all accounts if you could make it work but the electrics would be fun, but expensive.
BUSA is heavy compared to the 1000 motors and expensive and needs mods (more weight)
ZZR1400 would be my choice if going over 1000cc
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
twybrow
|
| posted on 24/10/11 at 07:55 AM |
|
|
quote:
Originally posted by stevebubs
quote:
Originally posted by fazerruss
quote:
Originally posted by Pat_T
I would say (as a powertrain design engineer for Triumph) that the BMW S1000rr engine is the daddy at the moment!
Engines from crashed bikes still seem to be fetching £3000 on ebay though, and getting the electronics to be happy in a car might be challenging as
all the TC systems are controlled from a gyroscope!!
Shame on you, whats wrong with going British!
My Triumph power plant works superb. I cant recommend it enough. It is fantastic on my Triumph frame, wheels. tank,seat, handle bars ect.....
Triple in the challenger went ok...
The Daytona lump went very well in my Stuart Taylor. There is no better souding bike engine out there...!
|
|
|
progers
|
| posted on 24/10/11 at 08:45 AM |
|
|
quote:
Originally posted by adithorp
cbr1000rr seems to be the engine of choice in RGB this year. Plenty of cars been swapped over to it this year.
*cough* except that the fastest car on the grid was powered by a GSXR1000 
Agreed the CBR1000 (08-> ) is a good engine but the latest generation ZX10 and gixxers are just as good. Its more about getting the right gearing
and things like engine height might come into the equation. All will work with wet sump too (modded for use in the car).
If the car is for road and trackdays choose what you fancy, if you intend to race look carefully at the regs of the various race series. For ultimate
power ZX14 is a good bet.
- Paul
[Edited on 24/10/11 by progers]
|
|
|
R1 STRIKER
|
| posted on 24/10/11 at 12:34 PM |
|
|
Car will be as track focused as possible but still remaining road legal. This may require a few mods after IVA. I'm sure it will be a pig to
drive on the road but that won't be it's 1st use. Having said that, I never found my old R1 powered striker that bad on the road.
So maybe a question for Andy, but what does he do differently to the striker chassis that Raw doesn't do. I assumed they were still made by the
same company.
|
|
|
TimC
|
| posted on 24/10/11 at 12:54 PM |
|
|
Andy did talk me through this once. The AB version was certainly designed to take 13" rims rather than the 15s of the standard Raw track
car.
The chassis was still made by the same fabrication firm but with AB's spec changes. When I last spoke with Andy about thr Striker he suggested
that I buy a bar chassis with no brackets attached and then send it to him to have the suspension put on.
|
|
|
Phil ashton
|
| posted on 17/5/15 at 06:12 PM |
|
|
Hi. Did you ever build your S1000rr engined Bec?
I only ask as I have a couple of suitable doner engines, brand new.
I have kept one for myself and would like to find someone thinking of a similar project.
Phil
|
|
|
