Davg
|
| posted on 9/1/10 at 03:00 PM |
|
|
R1 5vy wiring Cyclelock non starter help
Stripping loom & all usual suspects dealt with ie sidestand, clutch, tilt sensor & cutt-off and junked lights circuits. Still having issues
with the cyclelock wires that were previously chopped. Engine cranks over although not sending signal to ECU to start /prime pump still having
problems finding where to connect the 2 wires previously associated to the cyclock methinks, 1 comming from the ingition switch and the other from
red/green backup fuse. Any thoughts? Some pics in piccys of the offending in archive 'loom' cheers D
|
|
|
|
|
CRAIGR
|
| posted on 9/1/10 at 03:46 PM |
|
|
May help your cause i don't know.
http://www.scribd.com/doc/2634179/yzf-r1-manual
|
|
|
Davg
|
| posted on 9/1/10 at 04:03 PM |
|
|
Cheers for that Craig. already got diagrams, problem is thet don't show the ignit immob circuit.
thanks again though. D
|
|
|
CRAIGR
|
| posted on 9/1/10 at 04:18 PM |
|
|
Think its U.S spec that doesn't have the cyclelock so thought between this and the uk diagram you may be able to work it out.
|
|
|
CRAIGR
|
| posted on 9/1/10 at 04:20 PM |
|
|
What about this.
http://www.robcollingridge.com/kitcar/build/2006/04/index.html
|
|
|
fesycresy
|
| posted on 9/1/10 at 05:23 PM |
|
|
Taken from speed8 many years ago:
 
Cycle Lock 03 R1
And it works.
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
|
Davg
|
| posted on 15/1/10 at 04:02 PM |
|
|
AArgh!
thanks guys
appears the 5vy is a bit different.
To confirm set up includes uk loom which incorporated the immobilser key. i have the key & matched ecu & alos ow got another un-chopped loom.
can anyone confirm the connection that need looped from the 2 plugs in the pics hopefully posted.
white 2 pin plug
1 - immob transponder at key
2 - red/brown to backup fuse.
other 4 pin plug
2 - go to indicators so no connection req'd
1 - earth
1 - Brown signal/turn fuse feed
as said set up slightly differs from from older R1s
thanks D
Image deleted by owner
[Edited on 15/1/10 by Davg]
[Edited on 15/1/10 by Davg]
|
|
|
Davg
|
| posted on 15/1/10 at 07:27 PM |
|
|
with pics added at last!
[img][/img]
|
|
|
.jpg){kind=avatar}
