r1_manx
|
| posted on 2/6/09 at 11:52 AM |
|
|
35mm 90 degree exhaust bends (SS)
Hey guys,
Hello,
I am currently fabricating a custom manifold for my Yamaha R1 engined FWD mini. The manifold is being made from stainless steel and is 35mm OD tube.
I need to source some 35mm (1 3/8" stainless 90 degree bends to shape the manifold, can anyone on here possibly help me with this?
Cheers
Ben
www.r1manx.com
If im not in action, im in traction!
|
|
|
|
|
twybrow
|
| posted on 2/6/09 at 11:58 AM |
|
|
That is a very odd size. Could you not use a more commonly available size, like 1 1/2"?
|
|
|
blakep82
|
| posted on 2/6/09 at 11:59 AM |
|
|
merlin
motorsport for 1.75"
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
minitici
|
| posted on 2/6/09 at 12:25 PM |
|
|
Just buy another second hand R1 set of front pipes (early stainless ones - not the later Titanium!).
You should be able to construct a decent set of pipes from both sets.....
|
|
|
welderman
|
| posted on 2/6/09 at 12:35 PM |
|
|
i can get these bends, how many are you after
Joe
 
Rescued attachment bends.jpg
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
r1_manx
|
| posted on 2/6/09 at 02:06 PM |
|
|
I want to retain the stock R1 downpipe diameter which is 35mm and I have fabricated most of the manifold with some bends I bought from ebay, but ran
out when fabbing the last downpipe.
welderman: those bends would be ideal thanks, so far I have used 316L stainless for your info. Would you be able to get hold of 3 bends for me
please?
Cheers
Ben
If im not in action, im in traction!
|
|
|
