Johneturbo
|
| posted on 29/1/09 at 08:52 PM |
|
|
R1 oil level light
My oil level switch doesn't have a wire coming from it, its been cut flush
so i'm trying to stop the blooming oil light from flashing, i thought just earthing the wire from the clocks would do it but it didn't!
reading the manual, it looks like it needs a resistance
have tried a 510ohm and a 120ohm to earth but that don't work either
am i just gona have to get another switch
i can't let it win
[Edited on 29/1/09 by Johneturbo]
 
Rescued attachment oil level.jpg
|
|
|
|
|
afj
|
| posted on 29/1/09 at 08:55 PM |
|
|
i think i used a 120ohm resister to ground chris mason will know
eerrrrrrrrrrrrrrrr
|
|
|
Johneturbo
|
| posted on 29/1/09 at 08:58 PM |
|
|
Ok, so it's possible then
|
|
|
