After some advice on a half decent qr steering boss. Now i dont no much about fitting ect so any advice on what people are using?
Thanks
I've got a used racetec one you can buy if needed! 3 bolt 50mm fixings.
May sound stupid i am interested but unaware if it would be compatible. Sounds a very noob question but i havent read into it much
You would need a weld on boss with the same splines welding to the column!
I used an NRG as they have no play and I could get the locking plate for when the car is unattended.
http://www.getnrg.com
I'd advise against the Rally Design hub, mine developed play. I've heard good things about the Lifeline ones, probably worth the extra investment.