im building a new airbox for my zx12 but im unsure whether to have a panel filter fitted inside or put a cone type filter on the inlet to the airbox

your thoughts please

hi, here's ours with an external cone filter, hope that helps
Rescued attachment airbox-gsxr.jpg

brilliant thank you for that
i hope my airbox looks as nice as yours

I'd show you a picture of my airbox (cone type filter) but after that alloy TIGd porn photo I'd only embarrass myself

FWIW its usually easier to use a cone filter. I made the airbox out of CF. My first design was just a straight box with a 56mm fuel filler funnel on the side. Attach a 56mm cone filter and voila...

quote:

---

Originally posted by BenB
I'd show you a picture of my airbox (cone type filter) but after that alloy TIGd porn photo I'd only embarrass myself

FWIW its usually easier to use a cone filter. I made the airbox out of CF. My first design was just a straight box with a 56mm fuel filler funnel on the side. Attach a 56mm cone filter and voila...

---