After reading the posts on using above and having just blown my MK modified one ( the switch in the rad failed fortunately it blew at the weakest point. the rad core)
Any-one got any photos of how to mount the vw one , at present i have a nissan micra fan fitted between rad and chassis.
Tony

[Edited on 6/10/07 by mad-butcher]

The Golf one is too big for some nosecones. I know cos I bought one then had to buy the smaller Polo rad...

Agree with Ben. The Golf is about 50mm wider.

I could only 'just' fit a Golf one in my GTS nose and that's cos the nose is set somewhat further forward than usual. That included chopping about 5mm off the bleed nipple aswell.

HTH,
James

James your avatar is soon going to be seasonal again

Tony,

U2U sent and I've just uploaded some photos in my photo archive in the PoloRad folder.

Colin

many thanks colin photos help a great deal don't suppose you could measure the width and height of the core for me, my lad works in a motor factors in leyland and says there are several different core sizes,
Regards
Tony

Tony,

These dimensions are from my rad.


VW320 Polo Radiator Dims