Hello

Does anyone has any pics how they mounted the sensor on their car, I´m in the progress of mounting mine.

[Edited on 10/7/07 by badding]

see if these help, they take a bit of deciphering, 1st from rear below ,second looking rearward to the tunnel cheers Roger reverse what i said above!!!

[Edited on 10/7/07 by rpm]
Rescued attachment indy finished 025.jpg

how do you do the multiple pics?!!!
Rescued attachment indy finished 019.jpg

Is that a bolt you've put into the adaptor flange? Are there not any issues with balancing problems?Why have the prop all balanced then bolt a top heavy flange to it? Hmmm?

Did you use one or more bolts to get a correct reading on the speedo..

And as mister grumpy said, how about the balancing ??. I think you have to equally mount 2 bolts to the prop.

[Edited on 11/7/07 by badding]

[Edited on 11/7/07 by badding]

I've got 3 equally spaced bolts all drilled and mounted to give balance. 3 bolts gave a speedo reading at sva within limits so i didn't really need my speedohealer