Hi all.

The wiring diagram, IIRC, refers to a 2 wire plug, but could it be a red 4 wire plug?

How is it wired?

Thanks again,
Joao Caldeira

[Edited on 06/4/23 by JoaoCaldeira]
Rescued attachment ignition.jpg

There are 6 connections on the ignition switch.

4 are via the red plug including 1 from the light switch and 1 to the sidelight fuse, I can't remember the other 2, and my Haynes manual's on site.

The other 2, red & brown/blue via a white connector are the switched 12v.

Martin.

6???

I only had 5, 3 on a red plug and 2 on a white? plug... iirc

1 is the sidelights 2 short together from ECU to cutoff relay/clutch switch

The other 2 are the switched 12V.