Hi All

I need to fit two temperature sender adaptors to my R1 (ECU - electric 12mm and temp gauge - capillary). I want to fit these before the thermostat but can't find any hose adaptors in such a small size (19mm approx).

Can anybody tell me how they've overcome this problem.

Many thanks

Wyn

[Edited on 1/4/06 by lsdweb]

Hi Wyn

I only needed to fit one additional sender (for my dash) but I got my uncle to weld me in a boss on like this....


Digidash Temperature Sender

Iguess you could probably squeeze two senders onto that pipe

Clever!

I could get a boss welded onto each of the outlets from the head.

Thanks Chris

Yep its a good place to measure from, you get a very direct reading straight out the head. I forgot about that second pipe cos Ive chopped that down going into my head, so wouldnt be able to get a sender in there

[Edited on 2/4/06 by ChrisGamlin]

Thanks Chris

Space is tight so I may end up chopping some pipes as well!

Wyn