can any one out there help me with the correct wiring colours from sierra ignition to the bike ignition i have the 100 ohms resistor,but cant remember where everything goes,this is the last job i need to do,after this its tidy up wires and polish like mad(well it is an avon body)cheers keith.

Hi Keith

I've just looked at a few notes I did.
From what I can remember I got the power from the White in the bike loom. When the ignition is on this feeds +12v to the brown and +12v to the 100ohm resistor connected to grey wire.

cheers andy,do you know where the grey w
ire goes that comes from bike loom. does it finish at the resistor.

The grey wire just needs connecting to the resistor and a 12v feed to it from the ignition. I think I used the 2nd postion on the key for this as you need a feed that stays live when you're cranking the engine.

Andy.

thanks andy,will try this in a bit and will let you know how i get on,ps nice colour,
Rescued attachment kit car jan.jpg

can this wiring be explained a bit clearer,ie,where it goes on the sierra ign,i have brown from bike loom,white from bike loom and grey from bike,on sierra ign,i have,red,black and yellow,blue and black,and yellow,doing my head in now

thanks to you all,the engine now starts on the sierra ignition, hopefully see you all at donnington ps larry has just been round his car is fully legal now,with an age related plate (A) looks and sounds grreat cheers keith.