Board logo

GSXR 1000 K1 fast idle.... How to operate cable?
Sloan85 - 7/4/13 at 07:36 PM

My GSXR K1 had a cable from the handle bars to operate the fast idle. Any suggestions as to how I can control this cable from something mounted on the dash?

Cheers

40inches - 7/4/13 at 07:50 PM

A choke cable.

Sloan85 - 7/4/13 at 07:57 PM

Nice one, cheers.

40inches - 7/4/13 at 08:24 PM

Your welcome.

I put mine on the right hand side of the dash, to the right of the ignition switch.
Description
Description

[Edited on 7-4-13 by 40inches]

motorcycle_mayhem - 7/4/13 at 09:01 PM

You may well find you can do without the fast idle, that's my experience on all my K1's anyway, though I'm sure yours will differ.

The other thing is that if you've got a set of K2 TB's hanging around, these have the fast idle incorporated, so no cable. The K1 or K2 ECU is unconcerned about the differences with the K1 or K2 TB's.