hi guys the fuel pump in the r1 powered mk indy has the original bike pump in a sump located in the bottom of the tank the feed connector is horizontal but the return pipe is verticaly sticking out the base of the pump with the fuel hose connected and a loop of pipe to bring the hose horizontal it hangs down is it possible to fit a fitting the same as the fuel feed and if so how any ideas please

Hi
We have an Indy R1 , its a carbed version & we used a ZX9R pump


ZX9R Pump

Works fine.
Good luck

that pump wont work for injection though.

i found a 90 fuel hose fitting meant the pipe didn't hang quite as low. i would still like to improve it if its possible.