Board logo

Ht leads Which Order 893 blade
IDONTBELEIVEIT - 16/11/08 at 06:53 PM

i know that 1 and 4 go to the same coil and 2 and 3 go to the other,but does it matter which one on the same coil goes to which,ie swapping 1 and 4 over does this make a difference
help muchly appreciated


IDONTBELEIVEIT - 16/11/08 at 06:59 PM

any ideas??


Hellfire - 16/11/08 at 07:34 PM

Is that a general question or are you not sure which coil goes to which cylinder? If it's the latter, according to the manual, Black/White goes to No1, Yellow/Blue to No4 on one coil pack. On the second coil pack Black/White goes to No2 and Blue/Yellow goes to No3.

HTH

Phil


IDONTBELEIVEIT - 16/11/08 at 07:39 PM

cheers hellfire,just out of curiousity would it matter??cheers wayne


mark chandler - 16/11/08 at 07:43 PM

Its a wasted spark system, fires both plugs together so make no difference.

Regards Mark


Hellfire - 16/11/08 at 08:06 PM

Firing order is 1-2-4-3

Fitting leads the opposite way round would give a firing order of 4-3-1-2, which in sequence is the same order as above, so no difference.

Phil


IDONTBELEIVEIT - 16/11/08 at 08:20 PM

cheers fellas Rescued attachment hyper.gif
Rescued attachment hyper.gif