Ian D
|
| posted on 31/1/06 at 09:31 PM |
|
|
Floor mounted pedals
Has anyone advice on fitting floor mounted pedals in an Avon?
Who supply them and what are the issues. Im trying to get away from the Sierra pedals. I already have a new Sierra dual circuit master cylinder,
reservoir and sierra compensation valve. So im trying to avoid buying additional master cyliners bias valves etc.
My thoughts are to use the components I already have.
Thanks
Ian
|
|
|
|
|
Lightning
|
| posted on 31/1/06 at 10:15 PM |
|
|
I fitted floor ones. Recommebd putting the ali panel on the outside of the foot well, tunel side to get greater width. No other problems. I used ST
ones but most appear to be the same such as Leugo etc
 
Rescued attachment Chassis 016.jpg
Steve
|
|
|
gary gsx
|
| posted on 31/1/06 at 10:28 PM |
|
|
How wide are the st pedal boxs???
|
|
|
Avoneer
|
| posted on 31/1/06 at 11:24 PM |
|
|
MK's will weld on and use the original Sierra master cylinder.
Very simple and neat as well.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
gary gsx
|
| posted on 1/2/06 at 01:18 PM |
|
|
Does anyone have pics of MKs pedal box possible price to 
Ta Gary
|
|
|
Danozeman
|
| posted on 1/2/06 at 01:58 PM |
|
|
The price is on Mk's website. Here I think they are 60 quid or so.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
Avoneer
|
| posted on 1/2/06 at 05:04 PM |
|
|
See here:
http://www.locostbuilders.co.uk/viewthread.php?tid=22571
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
soggy
|
| posted on 1/2/06 at 06:07 PM |
|
|
mines also fitted with st floor mounted pedals
if at first u dont succeed use a bigger hammer!
|
|
|
Ian D
|
| posted on 2/2/06 at 07:55 PM |
|
|
Guys,
Thanks for your views and advice. I think im going to go for the MK solution and weld a 25mm tube to the floor plate and mount the pedals on it. The
main reason being that I can reuse my Sierra master cylinder.
Its only when you start that you see some off the challenges or do I meam problems!
Ian
|
|
|
mat.price
|
 posted on 2/2/06 at 08:06 PM |
|
|
i have the leugo floor mounted pedals on my avon, the one thing that im having trouble with is how or where to fit the brake light switch.
any ideas would be helpfull as we on the subject of floor mounted pedals
thanks matt
|
|
|
soggy
|
| posted on 2/2/06 at 08:20 PM |
|
|
i fitted a hydraulic brakeline switch.
if at first u dont succeed use a bigger hammer!
|
|
|
%20(WinCE).JPG)
