gjn200
|
| posted on 28/10/02 at 11:44 AM |
|
|
Viper
How are you going to get the drive shafts to fit? The ones that fit the LSD are lobro and to big for the carrier acording to tiger?????????
Graham
|
|
|
|
|
Viper
|
| posted on 28/10/02 at 05:34 PM |
|
|
Driveshafts
I made my own uprights...
|
|
|
Billywhizz
|
| posted on 28/10/02 at 08:23 PM |
|
|
special offers from tiger
Hi
Has anyone elese had the special offer pricelist through the post from tiger?
Chassis 325+vat bodywork 340+vat if ordered before end of november then goes up to 410+vat for chassis, 380+vat for bodywork
|
|
|
gjn200
|
| posted on 29/10/02 at 12:30 PM |
|
|
quote:
Originally posted by Viper
I made my own uprights...
Wanna make some more?
|
|
|
Viper
|
| posted on 29/10/02 at 09:03 PM |
|
|
uprights
the uprights i made are not quite the same as the book because i am using a rose joint in the top wishbones so i can sdjust rear toe in without
overloading the lower wishbone, and i am using discs so the mounting plate is different.
 
Rescued attachment PA280006.JPG
|
|
|
gjn200
|
| posted on 30/10/02 at 01:24 PM |
|
|
Look good, nice tig, but the jurys still out on the S/steel, I get lots of problems with it cracking at work (food ind). do you think the standard
ones could be modded to fit lobro shafts easy?
Graham
|
|
|
Viper
|
| posted on 30/10/02 at 08:11 PM |
|
|
Stainless?? whereabouts?
I havent got the book to hand so i am not sure of the wall thickness of the tube they use if memory serves you will need an I/D of 83mm.
|
|
|
gjn200
|
| posted on 31/10/02 at 05:40 PM |
|
|
Looks like it to me, maybe my screens dying.........
|
|
|
