Hi ,I made a Jig (by using book dimensions)for front lower wishbone and try to locate the damper bracket but when i made measurements i realized that it is different from the original ones that others builders uses as mentioned attached pic.Any help please.
Rescued attachment wish dim.JPG

let me send one of the sample picture taken from builder archive that i don't remember now who he is.
Rescued attachment pic07.jpg

It doesn't really matter, but the closer you get them to the bottom ball joint, the better.

IIRC, Tiger are still supplying the wrong length front shocks with Avons and they rest on the bump stops when the bottom bone is level with the ground.

Pat...

[Edited on 11/8/07 by Avoneer]

This is how I made mine.



Description

My track will be around 147 with ET41.
I'm using 13 " Spax.

The Tiger drawings will provied turning in your coil-over, which I personal not like!
I want the coil-over movement in one straight line.

look also in my photo-archive if you want

[Edited on 11/8/07 by t.j.]

Those plates are very nicely welded TJ..

Pat...

quote:

---

Originally posted by Avoneer
Those plates are very nicely welded TJ..

Pat...

---