B3Saxo
|
| posted on 27/1/03 at 01:51 PM |
|
|
A few quick questions!
I put my order into MK a few weeks ago. but iv'e got a few questions.
1) What is the average waiting time for a kit? I've just ordered the basic starter indy kit.
2) What thread size are the bolts for the front suspension and wishbone mountings?
3) What seats have you used for the Indy? Iv'e seen some cobra seats somewhere and fancy puting them in.
4) Does the car need a windscreen to pass SVA?
5) When i went to mk over new year there was a black indy in the corner with a chrome roll bar. what rollbar was it?
6) What would the estimate price for chroming a set of wishbones and a rollbar?
Thank you in advance for any feed back!
Dyl
Another quality post from B3Saxo!
|
|
|
|
|
Findlay234
|
| posted on 27/1/03 at 03:04 PM |
|
|
im not sure about the MK specific items, but..........
3. Indy is the same width as the book locost so look at McSorleys site for the exact dims, or use the book dims.
4. nope
6. i dont know what the price for actually chroming a set of wishbones are but there are alternatives, a friend of mine (yes i do actually have
friends apart from the internet) works in the automotive paint industry and he often makes batches of chrome paint which is by far cheaper than actual
chrome and gives exactly the same effect.
cheers
fin
|
|
|
donut
|
| posted on 27/1/03 at 04:03 PM |
|
|
Hi Dyl
Here are a few answers to your questions:
1) What is the average waiting time for a kit? I've just ordered the basic starter indy kit.
> I ordered mine mid September last year and i'm picking it up this coming sat!!! They usually take 8-10 weeks as a rule, i was the exception!!!
3) What seats have you used for the Indy? Iv'e seen some cobra seats somewhere and fancy puting them in.
>I'm probably going to get the MK ones as they are good value for money. If you have Cobra Roadster 7's then put them in, they are top seats!
4) Does the car need a windscreen to pass SVA?
>No. I know a few who put their cars through without. They are not required. I'm not, i'm going to use nothing for sva and then fit a wind deflector
and see how i get on with that. If i get too many flies in my teeth i'll put a screen on then but if/when you do put a full screen on you must have
wipers and de misters for MOT man.
5) When i went to mk over new year there was a black indy in the corner with a chrome roll bar. what rollbar was it?
>I think it's a pretty standard 4 point jobby that's been chromed. Looks nice!
Hope this helps
Andy
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
bob
|
| posted on 27/1/03 at 04:59 PM |
|
|
Q 2 = M12
|
|
|
B3Saxo
|
| posted on 28/1/03 at 12:36 AM |
|
|
Spot on!
Is'nt the internet great! Not only for porn!
Thanks guy's!
Another quality post from B3Saxo!
|
|
|
kingr
|
| posted on 28/1/03 at 11:26 AM |
|
|
It isn't? Could have fooled me!!
Fin : What's the name of this chrome paint, and where can I get it from? I quite fancy Dax style chrome bits on my car!!!
Kingr
|
|
|
B3Saxo
|
| posted on 30/1/03 at 01:52 AM |
|
|
A few more sorry.
When I phone Mk up I feel im askin so much questions.
7) Does the kit come with the rod bearings for the front suspension?
8) What pedals have people put in there's? Standard sierra ones, or Mk ones?
9) Do I need the sierra brake servo? Or a smaller one?
10) Anyone done a black fibreglass car with aluminium panels? How does it look?
11) Is there room for a hydraulic handbrake in the tunnel? (after sva of course!)
Thanks again!
10)
Another quality post from B3Saxo!
|
|
|
donut
|
| posted on 30/1/03 at 07:36 AM |
|
|
More answers to more questions.....
8)- If you have bought the kit then you get the MK ones which are fab. If not i think you do still need the MK ones.
9)- Yes, use a sierra brake servo.
10)- I have seen them on the net and they look the dog's danglies!!
11)- Caterham have them in theirs for auto test so i dont see a problem. Get the Demon Tweeks catalogue, there are a couple in there one of which does
look quite small.
Hope this helps. Don't forget to leave me your car in your will!
Andy
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
auzziejim
|
| posted on 30/1/03 at 09:12 AM |
|
|
as im getting an Indy this is helping quote alot! but dont the MK pedals cost £30? does this mean i have carefully removed and bagged up my pedals for
no reason?
|
|
|
B3Saxo
|
| posted on 30/1/03 at 10:30 AM |
|
|
Gonna have to order them pedals too!
Coming to think of it, the mk pedal mounts are floor mounted, and the sierra ones are top mounted!
Oh well! There goes another £30! 
Been looking at bob's build report, very helpfull!
Can't wait for the kit to arive!
Another quality post from B3Saxo!
|
|
|
auzziejim
|
| posted on 30/1/03 at 11:20 AM |
|
|
well its only £30! im worried about the exhaust and wiring loom! where abouts is bob's report?
|
|
|
donut
|
| posted on 30/1/03 at 12:04 PM |
|
|
Look in the photo section, that's 'the report'.
If you have bought the indy kit then the pedals come with it (i'm sure).
Picking mine up on Sat
YIPEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE!
 
Rescued attachment guinness.jpg
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
auzziejim
|
| posted on 30/1/03 at 12:12 PM |
|
|
mmmm guinness my favourite tipple! well of course thats once im 18! hehe
|
|
|
Findlay234
|
| posted on 30/1/03 at 12:48 PM |
|
|
kingr: ill find out the name of that paint for you and its details.
cheers
fin
|
|
|
CairB
|
| posted on 30/1/03 at 01:04 PM |
|
|
B3Saxo,
Q9 - I think that most don't fit a brake servo. I didn't and don't have problems.
|
|
|
B3Saxo
|
| posted on 30/1/03 at 02:26 PM |
|
|
So it's only the master cylinder they've fitted?
My Sierra Brake Cylinder has a huge servo bolted to it! I'd need some sort of a plunger to actuate it with out the servo mount.
Another quality post from B3Saxo!
|
|
|
kingr
|
| posted on 30/1/03 at 04:59 PM |
|
|
In the tiger book, it says to use the sierra M/C without the servo, and details a replacement section that have to make/buy. Don't know what the
situation with MK is.
Kingr
|
|
|
donut
|
| posted on 30/1/03 at 05:15 PM |
|
|
Bugger!! Sorry B3saxo i told you to use a brake servo and i was wrong. You just use the master cylinder. If you use a servo you will have over good
brakes and will probably fail SVA.
Saying that when i went out in the Indy demo car i was told that the brakes were really good so be carefull. They were bloody orrible! I never got a
chance to use them to the full and i found them to have no feel at all and i had to press damn hard to get them to work. I guess i'm just used to the
superb brakes on my car. Saying all this, if it passed SVA then the breakes will do the job!!
Andy 
Andy
When I die, I want to go peacefully like my Grandfather did, in his sleep -- not screaming, like the passengers in his car.
http://www.flickr.com/photos/andywest1/
|
|
|
B3Saxo
|
| posted on 31/1/03 at 03:04 PM |
|
|
Dont worry Donut, You ain't seen the brakes I'm fitting!!!!!!!!!!!!!!!!!!!!
I might just buy one sutible from deamon tweeks! only about £35 for the master cylinder and a long acctuator. Probably best with my callipers.
Another quality post from B3Saxo!
|
|
|
