mookaloid
|
| posted on 4/4/05 at 03:40 PM |
|
|
MK Front anti roll bar
Hi Snoopy,
Do you have a pic of the anti roll bar fitted to the Indy?
I would like one but just need to know that I can fit it in
Cheers
Mark
|
|
|
|
|
mookaloid
|
| posted on 4/4/05 at 06:41 PM |
|
|
Do You think it will clear my pinto engine?
And how is it fixed to the chassis rails?
Cheers
Mark
[Edited on 4/4/05 by mookaloid]
|
|
|
alister667
|
| posted on 4/4/05 at 07:17 PM |
|
|
I've been thinking about one of these as well.
Would you recommend changing the springs for softer ones at the same time?
I *think* I have 350lb springs up front at the moment, in a blade engined car.
My plan was to disconnect the anti-roll bar between track days.
http://members.lycos.co.uk/alister667/
|
|
|
mookaloid
|
| posted on 4/4/05 at 09:12 PM |
|
|
I haven't looked at my car but do you think it will clear my pinto?
Cheers
Mark
|
|
|
mookaloid
|
| posted on 4/4/05 at 09:28 PM |
|
|
Cool Thanks
|
|
|
zetec
|
| posted on 4/4/05 at 10:00 PM |
|
|
I will be trying 275lb springs instead of my 325lb, springs cheap and worth seeing if ARB and stiffer shock setting make any difference to ride.
|
|
|
mookaloid
|
| posted on 6/4/05 at 09:33 PM |
|
|
Hi Snoop,
Any news for me on fitting the ARB to the pinto engined car?
Cheers
Mark
|
|
|
mookaloid
|
| posted on 7/4/05 at 08:51 AM |
|
|
Hi Snoopy,
I have only just had chance to have a look at my car this morning. Here is a piccy of the engine bay.
I can't see the ARB fitting in the same place as Zetecs, would it go the other way around (mounted on the front wishbone bolts) do you think?
Cheers
Mark.jpg)
|
|
|
