Tezza1
|
 posted on 26/4/10 at 08:35 PM |
|
|
Aero screen
I have just recieved my new aero screen and tryed it for size looks kewl except one problem I can not see over it i no im not tall 5ft 9 but how do
others see over you all cant be over 6ft.
|
|
|
|
|
daniel mason
|
| posted on 26/4/10 at 08:38 PM |
|
|
are your seats bolted to floor or on runners/mounts?
|
|
|
macc man
|
| posted on 26/4/10 at 08:52 PM |
|
|
I had this problem I am only 5' 6" so I reduced the height by triming down slightly. I did plan to fit a clear perspex trim but never did.
|
|
|
RichardK
|
| posted on 26/4/10 at 08:55 PM |
|
|
 
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
Tezza1
|
| posted on 26/4/10 at 08:55 PM |
|
|
My seat is on runners passengers fixed down. i did have clear persplex but liked the aero screens.
|
|
|
Tezza1
|
| posted on 26/4/10 at 09:19 PM |
|
|
Ha Ha
Cheers Rich if I dont get it sorted I might need it to get to Stonleigh.
|
|
|
coozer
|
| posted on 26/4/10 at 09:22 PM |
|
|
Terry, if you need some spacers for the runners to lift the seat giz a shout.
1972 V8 Jago
1980 Z750
|
|
|
Tezza1
|
| posted on 26/4/10 at 09:27 PM |
|
|
have You got any 8" Lol
|
|
|
coozer
|
| posted on 26/4/10 at 09:59 PM |
|
|
Just the one like, and your not getting your hands on it!
1972 V8 Jago
1980 Z750
|
|
|
Stuart_B
|
| posted on 28/4/10 at 03:41 PM |
|
|
hi, i am 5ft 4 or so, i have a bubble, i can not see the front, but never had any problems with that end.lol
i have 1 inch spacers i did have 3 inch spacers.
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
hobzy
|
| posted on 28/4/10 at 07:40 PM |
|
|
Which screen is it? the MK one or a carbon mods one etc? I had to fettle the tabs on the ends of my carbon mods one to let it sit a little lower -
I'm 5'8 - couldn't raise the seat any higher or the roll bar would be useless.
|
|
|
scootz
|
| posted on 28/4/10 at 07:44 PM |
|
|
It's Evolution Baby!
|
|
|
Tezza1
|
| posted on 28/4/10 at 08:49 PM |
|
|
Hobzy I got it off ebay its like yours but fibreglass and to see over it i reckon I need my seat up about 3" min
|
|
|
hobzy
|
| posted on 28/4/10 at 08:56 PM |
|
|
Ignore the one in my avatar - is yours like this:
 
aeroscreen4
If it is and it has the tabs on the end that wrap around the edge of the scuttle you could cut them off to lower the angle. Worked for me. My seat is
a triton one on runners and a 3/4 spacer.
|
|
|
Tezza1
|
| posted on 28/4/10 at 09:13 PM |
|
|
Its the same one as Jacko has, if dont mind having a look at my post in wanted (aeroscreen) you can see the one
Cheers
|
|
|
hobzy
|
| posted on 28/4/10 at 09:54 PM |
|
|
Ah ok, cant tell if it has tabs on at each bottom corner that fold over the dash - if it does take them off and you can change the angle, although you
might have to add some more fixings to keep it from flexing.
|
|
|
jacko
|
| posted on 29/4/10 at 08:08 PM |
|
|
Im 5ft 8ins and can see ok you tend to look round the bumps not over them
Jacko
 
Dash / wind deflector
[Edited on 29/4/10 by jacko]
|
|
|
.jpg)
