bob tatt
|
| posted on 11/1/09 at 10:04 AM |
|
|
mk adjustable top wish bones
right then i have the standard top wish bones froom mk and i want to be able to adjust the camber more easily than having to remove the hub and turn
it that way. The reason for this is i do a lot of track days and road work as well but i run it ma lot lower on track so altering it every time before
and after is becoming a real pain in the arse. Im sure somone m,ust have ttried/done this before any suggestions would be greatly appreciated.
cheers rob
|
|
|
|
|
PAUL FISHER
|
| posted on 11/1/09 at 12:47 PM |
|
|
These should do the job.
http://www.gtscougar.freeserve.co.uk/mkindy.htm
[Edited on 19/05/04 by PAUL FISHER]
|
|
|
PAUL FISHER
|
| posted on 11/1/09 at 12:55 PM |
|
|
Or a pair of these,and modify your own wishbones?
http://www.gtstuning.co.uk/
 
Rescued attachment camber-adj xxxxxxxxxxxx.jpg
|
|
|
bob tatt
|
| posted on 11/1/09 at 02:46 PM |
|
|
just what im after many thanks mr fisher
|
|
|
bob tatt
|
| posted on 11/1/09 at 03:50 PM |
|
|
the camber adjusters do you just drill out the thread on the top of the wishbone or am i been thick. anyone done this and if so how much work is
involved. or is it better to get them ready done for you, not get any access to a piller drill so it would be in my garage by eye.
|
|
|
