stevec
|
| posted on 11/7/06 at 05:45 PM |
|
|
Sourcing Alu. side trim, (Hellfire)
Hellfire, can you or can someone point me to a supplier of the SVA proof Alu. side trims you have used. I have tried a few metal suppliers and no
luck.
Midlands area prefered.
Thanks.
Steve.
|
|
|
|
|
locoboy
|
| posted on 11/7/06 at 06:00 PM |
|
|
E J Holyoke coach builders in Shrewsbury stock all sorts of edging sections.
ATB
Locoboy
|
|
|
theconrodkid
|
| posted on 11/7/06 at 06:01 PM |
|
|
try b&q etc
who cares who wins
pass the pork pies
|
|
|
Danozeman
|
| posted on 11/7/06 at 06:08 PM |
|
|
bnq do some nice roudned edge ali angle.
Also have a look at this link
The chap 3 post down. He had loads of trim edging etc. He'l post anything anywhere and cheap.
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
stevec
|
| posted on 11/7/06 at 07:16 PM |
|
|
Thanks guys that gives me more to go on.
Steve.
|
|
|
Hellfire
|
| posted on 11/7/06 at 07:58 PM |
|
|
Steve, the stuff we used was supplied by a friend of mine in the shopfitting business. No idea where he got it from. (You don't tend to ask when
it's FOC) MK sell aluminium trim for the edges though.
Phil
|
|
|
stevec
|
| posted on 11/7/06 at 08:36 PM |
|
|
Phil.thanks, I know what you mean you just smile politley and say ta very much.
It should be a simple job really after all the other challenges, but thats what its all about I suppose
Steve..
|
|
|
RazMan
|
| posted on 11/7/06 at 08:47 PM |
|
|
I bought some nice looking 'step edging' at B&Q. 20mm 90 degree angle with a rounded edge and ribbed for extra pleasure (really)
£10 per 2 metre length
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
stevec
|
| posted on 11/7/06 at 09:44 PM |
|
|
Sounds just the job.
|
|
|
PaulBuz
|
| posted on 13/7/06 at 09:44 AM |
|
|
Try Leicester aluminium.
I use them all the time, they have racks & racks of every extrusion under the sun!
(on Freeman common Ind. Estate)
ATB
Paul
|
|
|
kev R1
|
| posted on 13/7/06 at 06:30 PM |
|
|
i got mine from mac#1 for my mk top job pre-bent for about thirty five quid for both sides and tunnel top
|
|
|
