I canīt understand how to get my throttlewire on to my pedal. Itīs just a small drilled hole and my wire is blank at that end.

easy description or good pictures are a big help

heres mine....
Rescued attachment throttle pedal.JPG

this is how i've done mine, the bolt that goes through the pedal is loose so that it can turn as the pedal moves



pedals/cables

[Edited on 17/3/08 by rotax78]

Here's how I did mine.
Rescued attachment Throttle cable attachment to pedal.JPG

I got one of those chocolate-block type wire connectors and use the inner metal bit- two screws to clamp on to the wire..

Use one either side of the pedal bar...

Thanks for the replyes. Strange that only 1 indy builder answers . Has no one else solved this.

BenB
Is that safe, doesnīt get loose after a while?

Rotax78
I donīt have that thing at the end of the wire, itīs just a loose wire.


Iīll try to solve this somehow

Ha, finally a fellow Belgian indy builder!

I ordered some cheap clips from rallydesign and modded them a bit.

More info and pics on the www below.

If you bought the kit from Haselier, chances are he's got some that don't need modding.

Dunno where you are exactly, but feel free to come and have a look.

mine is the same with rotax78 's

[Edited on 18/3/08 by kastrato]