hi, happy new year,
i do not know what to do as of the mounting of the cycle wing bracket??

Thanks

Stuart

HAHA! I spent about 5 mins looking at mine the other day. Couldn't figure it out so did the only proper thing.

Walked out the garage annoyed.



I'd be interested to see what replies you get and any pictures.

If you have Cortina uprights there are some handy holes already threaded probably for disk dust shields. I used these to mount mine. I used shopping trolley tubes for the main uprights, suitably bent by cut and shut to miss the tyres then inch by quarter to go under the wings themselves.
Caber

i am using sierra uprights, and does the bracket go behide it and i put a longer bolt and a nut the other side,

Picture below

[Edited on 1/1/08 by stuart_]
Rescued attachment parts 011111.JPG

is this right??

yep

tom

Bang on. I fitted mine last night and the above picture is correct.

Just make sure you dont put the calipers on upside down just like I didnt as they wont fit

Paul

hi, now i now how to mount them but what size are the bolts required to go through the hub and the bracket, as well of what type thread??

Thanks

Stuart