speedyxjs
|
 posted on 11/1/08 at 05:35 PM |
|
|
Welding update (feeling much better about this)
 
Now iv got it
And the penitration
 
Now iv got it 2
How long can i resist the temptation to drop a V8 in?
|
|
|
|
|
bonzoronnie
|
| posted on 11/1/08 at 05:48 PM |
|
|
Welding
Your welding is improving each time you post new pictures.
The penetration is getting there.
A couple of questions for you.
What size wire are you using ?
Are you welding from right to left ( Other way round if you are left handed) ?
The pictures looks as if you are welding in the wrong direction !!. This would explain the high build up and the erratic penetration.
On a downhand weld the MIG torch should be pushed away from the area being welded.
Looking a lot better though. 
Ronnie
|
|
|
speedyxjs
|
| posted on 11/1/08 at 05:49 PM |
|
|
.6 wire and welding the wrong way
How long can i resist the temptation to drop a V8 in?
|
|
|
JohnN
|
| posted on 11/1/08 at 05:57 PM |
|
|
Welds looking much better............
The focus of your camera is getting worse though
|
|
|
jacko
|
| posted on 11/1/08 at 05:59 PM |
|
|
With mig push the nozzle so the gas is cleaning the air away to make a air less pocket
Jacko
|
|
|
bonzoronnie
|
| posted on 11/1/08 at 06:02 PM |
|
|
Wrong way !!
quote:
Originally posted by speedyxjs
.6 wire and welding the wrong way
I thought so
Keep up the good work
Ronnie
|
|
|
speedyxjs
|
| posted on 11/1/08 at 06:20 PM |
|
|
Cheers guys. I cant find the charger for my camera so im using my phone. I was going to use my brothers but they came out even worse 
How long can i resist the temptation to drop a V8 in?
|
|
|
smart51
|
| posted on 11/1/08 at 07:22 PM |
|
|
mover the camera further away and crop the pictures to get better focus and a reasonably close image.
|
|
|
Mr Whippy
|
| posted on 11/1/08 at 08:12 PM |
|
|
do I need glasses?
Fame is when your old car is plastered all over the internet
|
|
|
TGR-ECOSSE
|
| posted on 11/1/08 at 08:19 PM |
|
|
Looking good. Now write your name in weld and post on here and you will have passed
|
|
|
speedyxjs
|
| posted on 11/1/08 at 08:37 PM |
|
|
quote:
Originally posted by TGR-ECOSSE
Looking good. Now write your name in weld and post on here and you will have passed
I was going to write locostbuilders but then didnt
How long can i resist the temptation to drop a V8 in?
|
|
|
