Board logo

1st time on its wheels.AND Inboard!
TPG - 4/2/07 at 06:57 PM

After moons of a r s e i n g about with the front end and every thing else,its finally on the floor.From the photos,obvoiusly bolts are missing/to long.The tie is missing behind the diff etc etc.
If I say o myself.I wish the NEW book had come out earlier then I would of saved loads of time not reinventing everything.Ho Hum....

[Edited on 4/2/07 by TPG] Rescued attachment 030207nsfsmall.jpg
Rescued attachment 030207nsfsmall.jpg


TPG - 4/2/07 at 06:58 PM

And the front.I took all on board earlier points and started again....
The shocks are a bit stiff still...????

[Edited on 4/2/07 by TPG] Rescued attachment 030207frontstudysmall.jpg
Rescued attachment 030207frontstudysmall.jpg


TPG - 4/2/07 at 06:58 PM

And the rear... Rescued attachment 030207rearsmall.jpg
Rescued attachment 030207rearsmall.jpg


RichardK - 4/2/07 at 07:01 PM

You been caught sitting in it making brm brm noises yet

Misses caught me, felt a complete tit

Nice one so far though

Regards

Rich


TPG - 4/2/07 at 07:03 PM

quote:
Originally posted by RichardK
You been caught sitting in it making brm brm noises yet

Most days.Dribbling as well
Thanks.
Richard


mookaloid - 4/2/07 at 07:19 PM

Looking very good Richard

I'll have to pop in to have a closer look - I like the further revised front suspension

Cheers

Mark