Guinness
|
| posted on 19/5/09 at 07:40 AM |
|
|
Wanted - Photos of Full Roll Cages
Specifically those fitted to finished 7's, rather than welded in during manufacture.
So photos showing options for mounting the front would be good, along with any designs that are easier / harder to get in and out of!
Cheers
Mike
|
|
|
|
|
nib1980
|
| posted on 19/5/09 at 07:48 AM |
|
|
have a look in my archive, mine was fitted during assembly, but could be done easily later with minimal welding.
 
outside at last 3
[Edited on 19/5/09 by nib1980]
|
|
|
welderman
|
| posted on 19/5/09 at 08:13 AM |
|
|
Heres one i made that went to Greece last year in bits so he could fit to his car, will look for linky thing too.
Joe
http://www.locostbuilders.co.uk/viewthread.php?tid=91105
more photos if wanted
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Steve Hignett
|
| posted on 19/5/09 at 08:38 AM |
|
|
Should be a couple to go on below...
http://www.therollcagepeople.com/FITTING%20INSTRUCTIONS%20%20FOR%20WESTFIELD%20FULL%20RACE%20CAGE%20-%20W003.pdf
http://www.therollcagepeople.com/gallerycustomers.htm
http://www.therollcagepeople.com/gallerycaterham.htm
http://images.google.co.uk/images?hl=en&q=caged+westfield&btnG=Search+Images&gbv=2&aq=f&oq=
http://images.google.co.uk/images?gbv=2&hl=en&safe=off&sa=1&q=caged+caterham&aq=f&oq=
http://www.procomp.co.uk/rollcage.html
[Edited on 19/5/09 by Steve Hignett]
|
|
|
Andy D
|
| posted on 22/5/09 at 03:35 PM |
|
|
quote:
So photos showing options for mounting the front would be good, along with any designs that are easier / harder to get in and out of!
Here's Pete and I "easily" getting into his old car. The half doors he had fitted did make a certain amount of gymnastic
ability desirable! 
My own car has a cage and no doors, it's fairly easy to enter / exit via the side. 
|
|
|
Major Stare
|
| posted on 11/7/09 at 08:42 PM |
|
|
I remember seeing a Westfield with an RAC roll bar that had additional bars welded on, to mate upto a front roll bar, then cross members put in the
roof section.
Looked hard (hard to explain how it was done).
A cage is on my list but cost it currently too much. If i knew how to weld, i'd have a go myself.
Jon "FISH"
|
|
|
eccsmk
|
| posted on 11/7/09 at 10:47 PM |
|
|
not brilliant but ita caged
also search for "the beast has been caged"
by matt.c
HTH
TDC
|
|
|
beaver34
|
| posted on 12/7/09 at 09:27 AM |
|
|
|
|
|
beaver34
|
| posted on 12/7/09 at 09:28 AM |
|
|
|
|
|
