Specifically those fitted to finished 7's, rather than welded in during manufacture.

So photos showing options for mounting the front would be good, along with any designs that are easier / harder to get in and out of!

Cheers

Mike

have a look in my archive, mine was fitted during assembly, but could be done easily later with minimal welding.



outside at last 3

[Edited on 19/5/09 by nib1980]

Heres one i made that went to Greece last year in bits so he could fit to his car, will look for linky thing too.

Joe

http://www.locostbuilders.co.uk/viewthread.php?tid=91105


more photos if wanted

http://www.therollcagepeople.com/FITTING%20INSTRUCTIONS%20%20FOR%20WESTFIELD%20FULL%20RACE%20CAGE%20-%20W003.pdf


http://www.therollcagepeople.com/gallerycustomers.htm


http://www.therollcagepeople.com/gallerycaterham.htm


http://images.google.co.uk/images?hl=en&q=caged+westfield&btnG=Search+Images&gbv=2&aq=f&oq=


http://images.google.co.uk/images?gbv=2&hl=en&safe=off&sa=1&q=caged+caterham&aq=f&oq=


http://www.procomp.co.uk/rollcage.html

[Edited on 19/5/09 by Steve Hignett]

quote:

---

So photos showing options for mounting the front would be good, along with any designs that are easier / harder to get in and out of!

---

I remember seeing a Westfield with an RAC roll bar that had additional bars welded on, to mate upto a front roll bar, then cross members put in the roof section.

Looked hard (hard to explain how it was done).

A cage is on my list but cost it currently too much. If i knew how to weld, i'd have a go myself.

not brilliant but ita caged


also search for "the beast has been caged"
by matt.c
HTH
TDC